Professional Grafting Tool

How to Use:

1. Hold the grafting tool and squeeze the handle to make the cut , repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
2. Slide the donor stem into the groove of the stock plant, matching the cut surface as closely as possible. If the stock and donor plant are not the same size , match on the side only.
3. Place sterlizing material around the join, and bind with the tape , strelizing  material will protect against bectaria and weather conditions.
4. Use the pruner to cut useless branches from the plant.
5. The grafting tool with " V&U & W blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six piece blade.

materials:

color:

• cut grafting stocks diameter from 5 mm/0.2′-1.4 cm/0.55′
• trimming blades thickness: 3 mm/0.12′
• size: 22 cm x 10 cm/8.66 inch x 3.94 inch (1 cm=0.39 inches)