Building Under Construction:

1 liter for 200 sq.ft. Make a solution by mixing one liter of Mite Hut with 48-80% liter of water. Step 1: Pour 5 liters of 48% trite hit solution into the base up to one square meter. 2nd Step: After D.P.C masonry in foundations, 6 inch wide grooves are made on both sides. Add 6 liters of termite hit solution in it at the rate of 5 liters per square meter before laying the floor.

Constructed Building:

Drill holes 18-24 inches apart in the walls as well as the floor and pour 6 liters of Termite Hit 48% solution in a 1 meter area. Build a 6-inch wide fence along the exterior walls of the building. Add 5 liters of Termite Hit 48% solution in an area of ​​one meter.  

For wood termites:

Soak the dry wood in a trite hit 48% solution for 30 minutes. Treat dry wood with 42.5 ml of Termite Hit in a 48% solution + one liter of water. Spray or paint with oil.

WARNING TO USERS: 

Manufacturers may be responsible for the quality of the drug if the drug is stored and used in accordance with recommended procedures and the drug is administered in its original form, subject to fluency of drug use and other factors. which are beyond the jurisdiction of the manufacturers, thereby The user will be responsible for the damage.